Fence
An old, failing privacy fence replaced with new pressure-treated panels, including a run set on top of an existing retaining wall.
The old fence was weathered and falling apart. Sections had come down, the yard was open to the neighbors, and part of the line ran along the top of a timber retaining wall.
We took down the failing sections, staged new pressure-treated panels, set them on the posts along the property line and along the retaining wall, then cut every post to a clean, even height. Brush and debris were cleared along the line.
More work
A bay-window ceiling with water damage. We opened it up, cut out the damaged drywall, put in a new section, then taped, skimmed and sanded it until it blended back into the ceiling.
An old fence line along the side of a house, torn out down to the posts and replaced with a new cedar fence and section by the gate.
A raised wood deck with two stair runs, repainted top to bottom: deck boards, rails, balusters, posts and every tread.
A rotted corner on the back of a house, where the second-floor overhang meets the soffit. We tore out the bad wood, built the corner back with new trim and painted it to match.
A section of bathroom ceiling over the shower, cut out and replaced with new drywall, then taped, skim-coated and finished so it blends in next to the exhaust fan.
A new Whirlpool over-the-range microwave hung above a gas range. We cut the cabinet above for the exhaust and power cord, set the vent adapter, ran and connected the duct, then mounted the unit level and tested it.